FRP Round Shape Cooling Tower-India

FRP Round Shape Cooling Tower-India

FRP Round Shape Cooling Tower-India

FRP Round Shape Cooling Tower-India

FRP Round Shape Cooling Tower-India facilitates in lowering the internal pressure drop of air. It also allows the external dry air to enter into the cooling tower from all directions. It is precisely because of this that the series reflects the most reliable and efficient cooling towers among all designs available in the market.


  • High strength FRP casing and basin
  • Tough and Light weight
  • Aesthetic and advanced design
  • Long life with minimal maintenance
  • Corrosion resistant
  • Durable and leak proof
  • Hot dip galvanized structure and internal parts for abrasion resistance.

Product Specification

Usage/Application Industrial
Brand Welltech
Capacity 25TR
Shape Round
Tower Material Fiberglass Reinforced Polyester
Tower Type Induced Draft
Supply Phase Three Phase
Fan Diameter 750mm
Color Blue
Flow Rate 250LPM
Inlet Temperature 35 Deg C
Outlet Temperature 30 Deg C
Motor Power 1hp
Country of Origin Made in India

Product Description

Round shape towers are used in all type of industries to cool the re cycle water flow from 200LPM to 1000 LPM. Round Shape will give very good appearance and 100% cooling efficiency. The rotary sprinkler gives uniform water flow over the wet deck fills and gives maximum cooling efficiency.

Round shaped or popularly known as bottle type are designed to cool industrial re-cycled process water from temperature of 50 degrees to temperature of 4 plus the prevailing Wet Bulb temperature of the region.

The tower design incorporates hot water inlet at the bottom collection sump circulated vertically to the mechanical rotary sprinkler located above the fill media. The inlet water pressure rotate the sprinkler, having extended arm pipes with orifices to disperse water uniformly over the fill media.

The fan directly coupled to the motor, during operations takes away the heat by induced draft mechanism. Air is drawn from the lower air in take area & is induced to travel through the fill media thus taking away the latent heat from the water passing through the fill media. Portion of water evaporated, removes the heat from the remaining water. The warm moist air is drawn through the fan deck is discharged to the atmosphere. Cold water, collected at the collection sump, is re-circulated to the source.

The distinguishing features of our product are compact design Honey comb type PVC fills, with varying flute sizes, to provide maximum contact surface area and heat transfer surface per unit volume.



Comments are closed.